BRYANT
BRYANT 5 Ton 14 Seer Bryant 120,000 Btu 96.2% Afue Gas System 189BNV060000-CNPVP6024ALA-925SA66120E24
$7,314.03

189BNV060000-CNPVP6024ALA-925SA66120E24

HVAC

The Bryant 189B Air Conditioner offers high efficiency variable speed performance in a remarkably small cabinet and provides up to 19 SEER cooling efficiency. The variable speed inverter capacity control delivers up to 5 stages of operation for exceptional load matching, dehumidification and zoning performance. This product has been designed and manufactured to provide flexible system matching and work with a wide variety of indoor units and controls.

The Bryant 189B Air Conditioner offers high efficiency variable speed performance in a remarkably small cabinet and provides up to 19 SEER cooling efficiency. The variable speed inverter capacity control delivers up to 5 stages of operation for exceptional load matching, dehumidification and zoning performance. This product has been designed and manufactured to provide flexible system matching and work with a wide variety of indoor units and controls.

Standard Features:

  • Energy Efficiency Up to 19 SEER / up to 12.5 EER
  • Microtube Technology refrigeration system
  • Sound level as low as 56 dBA in low-speed Silencer System II
  • Soft start and smooth ramp to operating speeds
  • Variable speed compressor operates at 5 stages with capacity range from as wide as 25-100%
  • Air cooled Inverter variable speed drive
  • System requires Evolution Connext Control with version 11 software or newer for 5 stage operation
  • Ratings provided with 2-stage thermostats and suitable non-communicating indoor products for 2-stage operation
  • refrigerant environmentally sound, won't deplete the ozone layer and low lifetime service cost
  • Front seating service valves
  • Inverter control drives compressor and fan motor
  • No control module attached to fan motor
  • Evolution intelligence monitors critical system parameters
  • Pressure equalizer valve for easy compressor starting
  • High pressure switch
  • Suction pressure transducer
  • Compressor discharge temperature sensor
  • Suction temperature sensor
  • Filter drier, field installed
  • Internal crankcase heater standard

Cabinet Features:

  • 2 control wires to outdoor unit in complete Evolution system and Control
  • Smaller and lighter than 2-stage units
  • Minimum and Maximum adjustments with Evolution Connex Control
  • Compatible with non-communicating thermostats
  • Durability: DuraGuardt protection package
  • Solid, Durable sheet metal construction
  • Steel louver coil guard
  • Baked-on, complete outer coverage, powder paint
  • Line sets up to 100 ft (30.5 m) equivalent length
  • No long-line accessories required

The Bryant vertical CNPVP Evaporator Coil is a furnace coil designed to provide the highest standards of reliability and durability. The coils are available for use in R-410A refrigerant and R-22 systems. Both designs have a painted case and come with factory-installed thermostatic expansion valves TXV. The coils are offered in different width configurations for use in multiple installation applications. Additionally, they are offered in a transition configuration, a design which simplifies making field-supplied transition duct configurations. Easy maintenance is provided as the coil slides out of the cabinet after removing the access door and service panel. The coils are available in sizes 018 through 061, 1.5 to 5 tons. A Bryant Preferred Series evaporator coil helps your heat pump or air conditioner deliver the high-efficiency ratings you expect. it's also the smallest coil of its kind in the industry. Designed, built and backed by the most reliable source for comfort and installed by your trusted local Bryant dealer, a Bryant Preferred Series evaporator coil is an excellent choice for environmentally sound, efficient comfort you can trust.

Standard Features:

  • Environmentally sound energy-efficient
  • Enhanced comfort
  • Durability and Drainage
  • Lasting looks and performance
  • Longer life
  • Water Management
  • Durable Condensate Pan
  • Brass Inserts
  • Refrigerant Connections
  • Burst Pressure
  • Thermostatic Expansion Valves TXV
  • Teflon Ring
  • Protective Tube Sheets

The Bryant 925SA Gas Furnace features the single stage Preferred System. The Boost ECM multiple speed blower motor is at the heart of the electrical efficiency provided by this furnace. With an Annual Fuel Utilization Efficiency (AFUE) of 96.2%, the Preferred single stage gas furnace provides added savings over standard gas furnaces.This Preferred Gas Furnace features 4-way multipoise installation flexibility, and is available in six model sizes. The 925SA can be vented for direct vent/two-pipe, ventilated combustion air, or single pipe applications. A Bryant Preferred Control and Preferred Air Conditioner or Heat Pump, can be used to form a complete Preferred Series System. All units meet California Air Quality Management District emission requirements. All sizes are design certified in Canada. All sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory approved MH accessory kit.

Standard Features:

  • Quiet operation. Compare for yourself at HVACpartners.com
  • Most sizes meet ENERGY STARR Version 4.0 criteria for gas furnaces: 95+ AFUE; AMACF electrical rating; 2% or less cabinet airflow leakage
  • Preferred Features match with the Preferred Control for Preferred System benefits
  • SmartEvap technology helps control humidity levels in the
  • Fan On Plus technology allows control of continuous fan speed from a compatible thermostat
  • Self diagnostics
  • Adjustable blower speed for cooling, continuous fan, and dehumidification
  • Approved for Twinning applications with accessory kit (42060 through 66120 models, only
  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit
  • Factory configured ready for upflow applications
  • Residential installations may be eligible for consumer financing through the Retail Credit Program
  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1 in. water column with all present air inlets, air outlets, and condensate drain port(s) sealed

Cabinet Features:

  • Ideal height 35 inches (889 mm) cabinet: short enough for taller coils,but still allows enough room for service
  • Silicon Nitride Perfect Light Hot Surface Igniter
  • External Media Filter Cabinet included
  • 4 way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through the cabinet downflow venting capability
  • Boost ECM multiple speed blower motor, single speed inducer motor, and single-stage gas valve
  • Aluminized steel primary heat exchanger
  • Stainless steel condensing secondary heat exchanger
  • Propane convertible
  • Fully insulated casing including blower section
  • Convenient Air Purifier and Humidifier connections
  • Direct vent/sealed combustion, single-pipe venting or ventilated combustion air
  • Installation flexibility: sidewall or vertical vent
Download Our Manuals

Currently no manuals available for this product. Please check product description or call our sales support team if you have any further queries.

Currently no specifications available for this product. Please check product description or call our sales support team if you have any further queries.

Hvac Technician Near Me - HVAC Refrigeration Systems

Get Service Calls